Skip to content

Cosmic expansion

Living result

What changes when you switch an assumption about cosmic expansion? Compare Planck, DESI distances, supernovae and the distance ladder on the same plane.

Explore the expansion chart
Provisional result

Ωₘ × H₀

ΛCDM · flat geometry

H₀ (km/s/Mpc)606264666870727476780.240.280.320.360.40ΩₘDESPantheon+SH0ESPlanckDESI

DESI · inner 68% and outer 95% joint contours at fixed ruler. Bands · ±1σ in one quantity. Points · synthesis values.

Scenario details

Provisional · unpublished

Planck, BAO with the standard ruler and the distance ladder point to different expansion rates.

See how each probe constrains Ωₘ and H₀ in flat ΛCDM.

The BAO contour is reconstructed from the DESI DR2 distances and covariance in flat ΛCDM at fixed r_d = 147.5 Mpc. Joint contours follow the likelihood minimum. The synthesis point is marked separately. The short ruler shows the reported point, with no reconstructed contour.

Planck constrains Ωₘh², with h = H₀/100. Supernovae constrain Ωₘ and the SH0ES ladder measures H₀.

Values, bands and comparisons

Cosmic microwave background

Ωₘ 0.3151 · H₀ 67.36

The band follows the physical matter density, Ωₘh², inferred by Planck. The marker gives the point adopted in the analysis based on Planck. The angular acoustic scale supplies a further constraint.

Ωₘh² 0.1430 ± 0.0011 · 100θ* 1.04110 ± 0.00031

Published reference

Baryon acoustic oscillations

Ωₘ 0.2972 · H₀ 68.69

DESI distances compare expansion with an acoustic ruler. The reference point in H₀ depends on the calibration of that ruler’s length. The BAO contour is reconstructed from the DESI DR2 distances and covariance in flat ΛCDM at fixed r_d = 147.5 Mpc. Joint contours follow the likelihood minimum. The synthesis point is marked separately. The short ruler shows the reported point, with no reconstructed contour.

Provisional · unpublished

DES-SN5YR supernovae

Ωₘ 0.352 ± 0.017

The relative distances of DES-SN5YR supernovae constrain Ωₘ in flat ΛCDM. The band extends along H₀ because the supernova-only analysis leaves the distance scale free.

Published reference

Pantheon+ supernovae

Ωₘ 0.334 ± 0.018

Pantheon+ pools supernovae from several surveys. Here the band uses only the relative distances from this sample, with a free distance scale.

Published reference

SH0ES distance ladder

H₀ 73.04 ± 1.04

Cepheids calibrate nearby supernovae and provide a local measurement of the expansion rate. The band extends along Ωₘ because the reference used here measures H₀.

Published reference

H₀ at the Planck physical matter density

Values conditioned on fixed Ωₘh². The BAO reference uses the standard ruler.

DES-SN5YR
63.8
Pantheon+
65.4
CMB · Planck
67.4
BAO · DESI DR2
69.4

Pairwise separations

Provisional comparisons for the reference and short-ruler scenarios.

CMB × BAO
2.25 σ
BAO × DES-SN5YR
2.84 σ
BAO × Pantheon+
1.82 σ
CMB × ladder
5.13 σ
BAO × ladder
3.88 σ
Short-ruler BAO × ladder
0.34 σ
Sources and evidence status

Published references give the probe measurements. The NEXO sensitivity comparisons are provisional. The DES offset analysis has been submitted to Physical Review D.

Expansion experiment

What happens to light along the way?

Follow a spectral line emitted at z = 2. The diagram uses flat ΛCDM, Ωₘ = 0.3 and H₀ = 70 km/s/Mpc.

Expansion of a comoving volume
λ = 500 nm

Illustrative simulation. Arrows indicate relative recession. The reference ring expands with physical distance.

Selected epoch
azDistance¹λ
0.33323.33 Mpc500 nm

¹ Pair with comoving separation of 10 Mpc. Hogg (1999)

Light leaves when two comoving galaxies are one third of their present separation.

Physical distance grows with the scale factor. The same expansion stretches the travelling wave.

A line emitted at 500 nm arrives at 1,500 nm. Its wavelength has tripled since emission.

Scientific figures

Explore DESI and JWST measurements, inspect the uncertainty in each series and find the data used in the figures.

DESI DR2 · BAO

What changes when you vary H₀?

Explore the expansion rate inferred from six DESI DR2 radial measurements.

Choose an H₀ value and see how the curve and residuals respond.

Model parameter

H₀ examples (km s⁻¹ Mpc⁻¹)

What a residual measures

A positive residual means the H(z) measurement exceeds the ΛCDM prediction at the same redshift. Changing H₀ moves the curve and residuals. The six DESI measurements stay fixed.

The panel uses differences in km s⁻¹ Mpc⁻¹. For a joint χ², use the original BAO measurements and their published covariance.

Figure 1. Expansion rate and residuals

Flat ΛCDM with Ωₘ = 0.30 and r_d = 147.5 Mpc held fixed. The residual is the measurement minus the prediction at the same redshift.

Figure 1. Expansion rate and residualsFlat ΛCDM with Ωₘ = 0.30 and r_d = 147.5 Mpc held fixed. The residual is the measurement minus the prediction at the same redshift.. X scale Redshift z (Linear). Y scale H(z) (km s⁻¹ Mpc⁻¹) (Linear). Residual (km s⁻¹ Mpc⁻¹). DESI DR2 · BAO, ΛCDM · H₀ = 70 km s⁻¹ Mpc⁻¹. Bands and bars show the supplied uncertainty bounds.. H(z) = c / [r_d × (D_H/r_d)] with r_d fixed at 147.5 Mpc. The band joins the marginal ±1σ endpoints after inversion in each bin. The curve uses the chosen parameters, and the residuals are differences in the axis unit for that fixed model.. DESI DR2 · BAO measurements and cosmological constraints (https://arxiv.org/abs/2503.14738) · DESI DR2 · BAO measurement vector (https://github.com/CobayaSampler/bao_data/blob/v2.6/desi_bao_dr2/desi_gaussian_bao_ALL_GCcomb_mean.txt) · DESI DR2 · BAO measurement covariance (https://github.com/CobayaSampler/bao_data/blob/v2.6/desi_bao_dr2/desi_gaussian_bao_ALL_GCcomb_cov.txt)H(z) (km s⁻¹ Mpc⁻¹)25020015010000.511.52DESI DR2 · BAOΛCDM · H₀ = 70 km s⁻¹ Mpc⁻¹Residual (km s⁻¹ Mpc⁻¹)50−5Redshift z

Move over or tap a point. Use ← and → on the chart to browse values.

Bands and bars show the supplied uncertainty bounds.

H(z) = c / [r_d × (D_H/r_d)] with r_d fixed at 147.5 Mpc. The band joins the marginal ±1σ endpoints after inversion in each bin. The curve uses the chosen parameters, and the residuals are differences in the axis unit for that fixed model.

Which combinations of w₀ and wₐ fit the data?

The grid combines the 13 DESI DR2 BAO measurements with their published covariance. The flat CPL model uses w(a) = w₀ + wₐ(1 − a), with Ωₘ = 0.30, H₀ = 70 km s⁻¹ Mpc⁻¹ and r_d = 147.5 Mpc held fixed.

Figure 2. Δχ² contours in the w₀–wₐ plane
Conditional CPL Δχ² contoursw₀ = -1.09, wₐ = 0.0 · Δχ² = 0-1.6-1.3-1.0-0.7-0.4-2.4-1.20.01.22.4wₐw₀
Visible contours

Grid minimum
w₀ = -1.09 · wₐ = 0.0

Contours are interpolated between grid points. The thresholds are Δχ² values relative to the sampled minimum.

Figure 3. Δχ² profile in w₀

At each w₀, the profile uses the smallest Δχ² among the wₐ values in the grid above.

Figure 3. Δχ² profile in w₀At each w₀, the profile uses the smallest Δχ² among the wₐ values in the grid above.. X scale w₀ (Linear). Y scale Δχ² (Linear). CPL grid profile. Uncertainty bounds unavailable.. DESI DR2 · BAO measurements and cosmological constraints (https://arxiv.org/abs/2503.14738) · DESI DR2 · BAO measurement covariance (https://github.com/CobayaSampler/bao_data/blob/v2.6/desi_bao_dr2/desi_gaussian_bao_ALL_GCcomb_cov.txt)Δχ²250200150100500−1.6−1.4−1.2−1−0.8−0.6−0.4CPL grid profilew₀

Move over or tap a point. Use ← and → on the chart to browse values.

Figure 4. Linear growth rate in ΛCDM

The curve shows the approximate prediction for the growth rate f = d ln D / d ln a, where D is the growth factor.

Figure 4. Linear growth rate in ΛCDMThe curve shows the approximate prediction for the growth rate f = d ln D / d ln a, where D is the growth factor.. X scale Redshift z (Linear). Y scale Growth rate f (dimensionless) (Linear). ΛCDM · Planck 2018. Bands and bars show the supplied uncertainty bounds.. Flat ΛCDM prediction with f ≈ Ωₘ(z)^0.55. The band varies only the present-day matter density within Ωₘ,₀ = 0.315 ± 0.007.. Planck 2018 · Cosmological parameters (https://arxiv.org/abs/1807.06209) · Linder (2005) · Growth index (https://arxiv.org/abs/astro-ph/0507263)Growth rate f (dimensionless)10.90.80.70.60.500.511.522.53ΛCDM · Planck 2018Redshift z

Move over or tap a point. Use ← and → on the chart to browse values.

Bands and bars show the supplied uncertainty bounds.

Flat ΛCDM prediction with f ≈ Ωₘ(z)^0.55. The band varies only the present-day matter density within Ωₘ,₀ = 0.315 ± 0.007.

The spectrum of GN-z11

The NIRSpec prism records a sharp drop in flux at wavelengths shorter than Lyα. Other emission lines give the galaxy redshift, z = 10.6034 ± 0.0013.

The spectrum of GN-z11The NIRSpec prism records a sharp drop in flux at wavelengths shorter than Lyα. Other emission lines give the galaxy redshift, z = 10.6034 ± 0.0013.. X scale Observed wavelength (µm) (Linear). Y scale Fλ (10⁻²¹ erg s⁻¹ cm⁻² Å⁻¹) (Linear). NIRSpec prism · 3-pixel extraction. Bands and bars show the supplied uncertainty bounds.. The band shows the flux uncertainty per sample from the FITS file. Vertical markers show the centroids measured with the medium-resolution gratings, Lyα (1.41320 ± 0.00010 µm) and C III] (2.21392 ± 0.00020 µm). The C III] marker refers to the doublet.. Bunker et al. (2023) · Table 1 (https://doi.org/10.1051/0004-6361/202346159) · FITS spectrum · JADES / MAST DR4 (https://archive.stsci.edu/hlsps/jades/dr4/goods-n/spectra/clear-prism/goods-n-mediumhst/hlsp_jades_jwst_nirspec_goods-n-mediumhst-00003991_clear-prism_v2.0_x1d.fits) · Scholtz et al. (2026) (https://doi.org/10.1093/mnras/stag939) · CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)Fλ (10⁻²¹ erg s⁻¹ cm⁻² Å⁻¹)201510501.21.41.61.822.22.4Lyα · 1.4132C III] · 2.21392NIRSpec prism · 3-pixel extractionObserved wavelength (µm)

Move over or tap a point. Use ← and → on the chart to browse values.

X-axis references

  • Lyα 1.4132
  • C III] 2.21392

Bands and bars show the supplied uncertainty bounds.

The band shows the flux uncertainty per sample from the FITS file. Vertical markers show the centroids measured with the medium-resolution gratings, Lyα (1.41320 ± 0.00010 µm) and C III] (2.21392 ± 0.00020 µm). The C III] marker refers to the doublet.

Distant galaxies in the GOODS-North field

79 target positions with spectroscopic redshift z ≥ 6 and a JADES DR4 quality flag of A or B.

Distant galaxies in the GOODS-North field79 target positions with spectroscopic redshift z ≥ 6 and a JADES DR4 quality flag of A or B.. X scale Right ascension (°) (Linear). Y scale Declination (°) (Linear). Other JADES targets, GN-z11. Uncertainty bounds unavailable.. North is up and east is left. Each point corresponds to one NIRCam ID in the catalogue and uses the NIRSpec target coordinates.. FITS catalogue · JADES / MAST DR4 (https://archive.stsci.edu/hlsps/jades/dr4/goods-n/catalogs/hlsp_jades_jwst_nirspec_goods-n_clear-prism-gratings-line-fluxes_v1.2_catalog.fits) · Curtis-Lake et al. (2026) (https://doi.org/10.1093/mnras/stag836) · Data subsets as JSON (/jades-dr4-gn-z11.json) · CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)Declination (°)62.362.2562.262.15189.3189.25189.2189.15189.1189.05189Other JADES targetsGN-z11Right ascension (°)

Move over or tap a point. Use ← and → on the chart to browse values.

Uncertainty bounds unavailable.

North is up and east is left. Each point corresponds to one NIRCam ID in the catalogue and uses the NIRSpec target coordinates.